Advertisements

“Top 10 OSHA Citations of 2016: A Starting Point for Workplace Safety”

OSHAupdate

Every October, the Department of Labor’s Occupational Safety and Health Administration releases a preliminary list of the 10 most frequently cited safety and health violations for the 2016 fiscal year, compiled from nearly 32,000 inspections of workplaces by federal OSHA staff.

One remarkable thing about the list is that it rarely changes. Year after year, our inspectors see thousands of the same on-the-job hazards, any one of which could result in a fatality or severe injury.

More than 4,500 workers are killed on the job every year, and approximately 3 million are injured, despite the fact that by law, employers are responsible for providing safe and healthful workplaces for their workers. If all employers simply corrected the top 10 hazards, we are confident the number of deaths, amputations and hospitalizations would drastically decline.

Consider this 2016 list a starting point for workplace safety:

  1. Fall protection
  2. Hazard communication
  3. Scaffolds
  4. Respiratory protection
  5. Lockout/tagout
  6. Powered industrial trucks
  7. Ladders
  8. Machine guarding
  9. Electrical wiring
  10. Electrical, general requirements

It’s no coincidence that falls are among the leading causes of worker deaths, particularly in construction, and our top 10 list features lack of fall protection as well as ladder and scaffold safety issues. We know how to protect workers from falls, and have an ongoing campaign to inform employers and workers about these measures. Employers must take these issues seriously.

We also see far too many workers killed or gruesomely injured when machinery starts up suddenly while being repaired, or hands and fingers are exposed to moving parts. Lockout/tagout and machine guarding violations are often the culprit here. Proper lockout/tagout procedures ensure that machines are powered off and can’t be turned on while someone is working on them. And installing guards to keep hands, feet and other appendages away from moving machinery prevents amputations and worse.

Respiratory protection is essential for preventing long term and sometimes fatal health problems associated with breathing in asbestos, silica or a host of other toxic substances. But we can see from our list of violations that not nearly enough employers are providing this needed protection and training.

The high number of fatalities associated with forklifts, and high number of violations for powered industrial trucksafety, tell us that many workers are not being properly trained to safely drive these kinds of potentially hazardous equipment.

Rounding out the top 10 list are violations related to electrical safety, an area where the dangers are well-known.

Our list of top violations is far from comprehensive. OSHA regulations cover a wide range of hazards, all of which imperil worker health and safety. And we urge employers to go beyond the minimal requirements to create a culture of safety at work, which has been shown to reduce costs, raise productivity and improve morale. To help them, we have released new recommendations for creating a safety and health program at their workplaces.

We have many additional resources, including a wealth of information on our website and our free and confidential On-site Consultation Program. But tackling the most common hazards is a good place to start saving workers’ lives and limbs.

Thomas Galassi is the director of enforcement programs for OSHA.

Advertisements

“Top 10 OSHA Citations of 2016: A Starting Point for Workplace Safety”

OSHAupdate

Every October, the Department of Labor’s Occupational Safety and Health Administration releases a preliminary list of the 10 most frequently cited safety and health violations for the 2016 fiscal year, compiled from nearly 32,000 inspections of workplaces by federal OSHA staff.

One remarkable thing about the list is that it rarely changes. Year after year, our inspectors see thousands of the same on-the-job hazards, any one of which could result in a fatality or severe injury.

More than 4,500 workers are killed on the job every year, and approximately 3 million are injured, despite the fact that by law, employers are responsible for providing safe and healthful workplaces for their workers. If all employers simply corrected the top 10 hazards, we are confident the number of deaths, amputations and hospitalizations would drastically decline.

Consider this 2016 list a starting point for workplace safety:

  1. Fall protection
  2. Hazard communication
  3. Scaffolds
  4. Respiratory protection
  5. Lockout/tagout
  6. Powered industrial trucks
  7. Ladders
  8. Machine guarding
  9. Electrical wiring
  10. Electrical, general requirements

It’s no coincidence that falls are among the leading causes of worker deaths, particularly in construction, and our top 10 list features lack of fall protection as well as ladder and scaffold safety issues. We know how to protect workers from falls, and have an ongoing campaign to inform employers and workers about these measures. Employers must take these issues seriously.

We also see far too many workers killed or gruesomely injured when machinery starts up suddenly while being repaired, or hands and fingers are exposed to moving parts. Lockout/tagout and machine guarding violations are often the culprit here. Proper lockout/tagout procedures ensure that machines are powered off and can’t be turned on while someone is working on them. And installing guards to keep hands, feet and other appendages away from moving machinery prevents amputations and worse.

Respiratory protection is essential for preventing long term and sometimes fatal health problems associated with breathing in asbestos, silica or a host of other toxic substances. But we can see from our list of violations that not nearly enough employers are providing this needed protection and training.

The high number of fatalities associated with forklifts, and high number of violations for powered industrial trucksafety, tell us that many workers are not being properly trained to safely drive these kinds of potentially hazardous equipment.

Rounding out the top 10 list are violations related to electrical safety, an area where the dangers are well-known.

Our list of top violations is far from comprehensive. OSHA regulations cover a wide range of hazards, all of which imperil worker health and safety. And we urge employers to go beyond the minimal requirements to create a culture of safety at work, which has been shown to reduce costs, raise productivity and improve morale. To help them, we have released new recommendations for creating a safety and health program at their workplaces.

We have many additional resources, including a wealth of information on our website and our free and confidential On-site Consultation Program. But tackling the most common hazards is a good place to start saving workers’ lives and limbs.

Thomas Galassi is the director of enforcement programs for OSHA.

OSHA Blasts Firearms Manufacturer for Machine Hazards

Aug 28, 2009

OSHA says that widespread machine guarding and lockout/tagout hazards at a North Haven, Conn.-based manufacturer of small firearms has resulted in $42,850 in proposed fines from the agency. The Marlin Firearms Co. has been cited for a total of 24 alleged serious and other-than-serious violations of workplace safety standards following a comprehensive OSHA inspection that began at the company’s plant March 3.

The inspection identified dozens of instances throughout the plant where workers were exposed to possible lacerations, amputation, and crushing injuries from unguarded moving parts of mechanical power presses and other machinery as well as a lack of specific procedures to prevent the accidental startup of numerous machines during set-up, maintenance, and repair. The inspection also found electrical, fall, and compressed-air hazards as well as improperly recorded injuries and illnesses.

“Workers can lose their fingers, limbs, or lives in a few seconds if a machine starts up unexpectedly or its moving parts are not guarded against contact,” said Robert Kowalski, OSHA’s area director in Bridgeport. “There is no reason for those injuries to occur if the employer ensures the proper safeguards are effectively and continuously in place and in use.”

OSHA issued the company 20 serious citations, with $41,850 in fines, for the safety hazards, and four other-than- serious citations, with a $1,000 fine, for a recordkeeping violation. The company has 15 business days from receipt of the citations to comply, meet with OSHA, or contest the citations and proposed penalties before the independent Occupational Safety and Health Review Commission.

Information about OSHA’s machine guarding and hazardous energy control (lockout/tagout) standards, including interactive eTools, is available at http://www.osha.gov/SLTC/machineguarding/index.html and http://www.osha.gov/SLTC/controlhazardousenergy/index.html.

%d bloggers like this: